Multi-range 500A Voltage Output Sensor for Capturing Waveforms with DMMS

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9010-50 is multi-range 500A AC voltage output clamp sensors for capturing waveforms with DMMs

**MUST ALSO USE CONVERSION ADAPTER 7904**

Rated current	10 A to 500 A AC, 6 ranges
Accuracy	±2 % rdg. ±1 % f.s. (45 to 66 Hz)
Frequency characteristics	Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 6 % rdg. (at 10 A and 20 A range) ± 3 % rdg. (for 50 A range and above)
Output rate	0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MΩ)
Max. allowable input	150 A rms continuous (10/20/50 A ranges) 400 A rms continuous (100/200 A ranges) 650 A rms continuous (500 A range) (For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating)
Max. rated voltage to earth	600 Vrms (50/60 Hz, CAT III)
Core diameter	φ46 mm (1.81 in)
Dimensions and mass	78 mm (3.07 in)W × 188 mm (7.40 in)H × 35 mm (1.38 in)D, 420 g (14.8 oz), cord length: 3 m (9.84 ft)
Accessories	Instruction manual ×1